Zanussi ZOP38903 User Manual - Daily Use
normal. Make sure that the airflow in the room is
sufficient.
Let the oven cool down. Dampen a soft cloth
with warm water and a little mild washing-up
liquid and use this to clean the oven cavity.
Daily use
WARNING!
Refer to Safety chapters.
Display
A
B
C
A) Oven function
B) Temperature
C) Time
Buttons
Button
Function
Description
On / off
To activate or deactivate the oven.
Selection
To set an oven function.
Fast Heat Up
To activate the Fast Heat Up function.
Pyrolysis
To start the pyrolytic cleaning.
Minus, plus
To set the time and temperature.
Clock
To set a clock function.
Setting an oven function
When you set an oven function, the
temperature symbol flashes. The
symbol shows that the temperature
in the appliance increases.
When the appliance is at the set
temperature, an acoustic signal
sounds and the temperature symbol
stops flashing.
1. Press to activate the appliance.
2. Press again and again until the symbol
for the necessary oven function flashes.
The display shows the default temperature. If
you do not change the temperature in
approximately five seconds, the appliance starts
to operate.
3. To change the temperature, press or .
Changing the temperature
1. Press the button .
The symbol ° flashes.
2. Press the button or to change the
temperature.
www.zanussi.com
7