Zanussi ZOP38903XD User Manual - Clock Functions
Clock functions
Clock function
Application
Time of day
To set, change or check the time of day.
Minute Minder
To set a countdown time. This function has no effect on the operation of
the oven.
Duration
To set how long the appliance must operate.
End
To set when the appliance must be deactivated.
You can use Duration
and End
at
the same time to set the time when the ap-
pliance must be activated and then deactivated.
First set Duration
, then End
.
Setting the clock functions
1
2
1.
For Duration
and End
, set an oven
function and temperature. This is not nec-
essary for the Minute Minder
. Refer to
"Setting an oven function".
2.
Press
again and again until the symbol
for the necessary clock function flashes.
3.
Press + or - to set the necessary clock
function.
The display shows the symbol for the clock
function you set. When the set time ends,
the symbol flashes and an acoustic signal
sounds for two minutes.
With the Duration
and End
func-
tions, the appliance deactivates automati-
cally.
4.
Press a button to stop the signal.
5.
Deactivate the appliance.
Cancelling the clock functions
1.
Press
again and again until the symbol
for the necessary clock function and
flash in the display.
2.
Press and hold the button - until the clock
function goes out.
Using the accessories
Warning! Refer to the Safety chapters.
Trivet and Grill- / Roasting pan
Warning! Be careful when you remove
the accessories from a hot appliance.
There is a risk of burns.
9
www.zanussi.com