Zanussi ZT 6810 Instruction Booklet - Internal Cleaning

Internal cleaning

Ensure that the seals around the door, the detergent and

rinse aid dispensers are cleaned regularly with a damp

cloth.

We recommend the use of Finish Dishwasher Cleaner

every 3 months or run a 65°C wash without dishes using

detergent. Regular use of Finish Dishwasher Cleaner

cleans inaccessible parts, eliminates unpleasant food

odours and helps prevent the build-up of limescale.

Cleaning the central filter

(After each wash)

Scraps of food may accumulate in the drain filter (A)

and should be removed by rinsing the filter under

running water.

To remove the drain filter:

-

simply pull it out by the handle.

Once cleaned, refit the filter by pushing it back to its

original position until it engages.

Cleaning the large filter

(Every month)

If necessary clean the large filter (B) on both sides under

running water, using a brush.

To remove the large filter

1.

Remove the spray arm by pulling it upwards on 

one side.

2.

Turn the column (C) anticlockwise by 90° and 

then slide out the filter.

3.

Once cleaned refit it following the above 

instructions in reverse order.

4.

Ensure the filter is in its original position, the 

handle of the drain filter should be pointing 

towards the front of the appliance.

The dishwasher must not be used

without filters.

Incorrect repositioning and fitting of

the filters will produce poor washing

results.

Cleaning the filters is vital to ensure

correct operation of the machine.

Maintenance and cleaning

19

PMC04UK

A

MA04

C

90

°

B

MA05