Zanussi ZT 6810 Instruction Booklet - Water Supply Connections

Remove all packaging before positioning

the machine.

If possible, position the machine next to a water tap and

a drain.

Water supply connections 

This dishwasher must be plumbed into a cold water

supply.

The water pressure must be within the limits given in the

technical specifications. 

Your local Water Authority will advise you on the

average mains pressure in your area. 

The dishwasher features fill and drain hoses which can

be turned either to the left or the right to suit the

installation.

The locknut must be correctly fitted to

avoid water leaks. 

Avoid bends or kinks in the hose which could prevent or

slow down the water supply. 

If the machine is connected to new pipes or pipes which

have not been used for a long time, you should run the

water for a few minutes before connecting the inlet hose.

This will prevent deposits of sand or rust clogging the

inlet hose filter. 

26

PWA01UK