Zartek COM8 User Manual - page 13
13
code can listen and talk to each other. Using this function will
improve the privacy of your communication.
To select a CTCSS code
Press the " " key twice, the CTCSS code display will
flash.
Press " " or " " key to select your required CTCSS code
(1~38, " 0 " is off).
Press the "PTT" key to confirm or press "
" to continue.
You have 12 seconds to decide before auto-reverting back to
the main screen.
(11) SENDING CALL-TONES
You can use 1 of 10 different
“Call Tones” to get attention of other
user on the same channel.
Press the
key and the tone will sound, LCD will display thee
transmit icon
and
icon and your call tone will be sent.
(12) SELECTING A CALL-TONE (10 AVAILABLE)
Press the
key 3 times, LCD display
icon and call tone
number will flash.
Press
or
key to select your desired call tone.
Press the PTT key to confirm and quit or press
to continue
next function setting.
(13) VOX “HANDS FREE WALK & TALK”
The
Zartek COM8 has innovative state-of-the-art technology not
seen in other two-way radios with its multi-level sensitivity
built-in VOX function. You can enjoy talking and listening
without pressing PTT key as transmit is automatically activated by
sound. This turns your radio into hands free “walk & talk” with
your included earphone. Setting 3 is the most sensitive to noise.
To turn on VOX function press " " key 4 times, the LCD
displays the
icon and the VOX sensitivity digit display
will flash.
Press" " or " " key to select OF, 1, 2 or 3(OFF, low,
medium & high sensitivity).