Zartek COM8 User Manual - page 15
15
Press PTT to confirm and quit or press " " key once to
confirm the selection and continue to the next menu feature.
After turning on this function the LCD will display "Baby"
icon on the main screen. Messages will NOT be received in
this mode but only transmitted so that the baby is not
disturbed by other conversations on the same channel.
(17) ROGER BEEP (ON/OFF)
The Roger beep notifies the receiving radio that the conversation
has ended by sounding a beep when the transmitter has finished.
To activate the roger beep press the " " key 7 times and
the LCD will display "RGR".
Press the " " or " " key to turn on ("ON" icon) or turn off
("OF" icon) the Roger beep.
Press PTT to confirm and exit to the main screen or press
the "
" key once to confirm the selection and continue to
the next menu feature.
After turning on the Roger beep, LCD will display RGR
icon.
(18) AUTO POWER OFF (APO)
Press the "
" key 8 times the LCD displays the
icon.
Press " " or " " key to select auto power off time from 0 to
12 hours.
Press PTT button to confirm and return to the main screen or
press the"
" key once to confirm the selection.
After turning on this function the LCD will display the "
"
icon and automatically turn off at designated time.
(19) SCANNING CHANELLS
Press " " key once and the " " icon will appear and radio
will start scanning through the 304 channels automatically.
Note: Pressing the button for over 2 seconds, will break the
squelch noise and open (un-squelch) the frequency.
The radio scans all the frequencies one by one and will lock
on any activity. After locking-on to a conversation, press the