Zartek COM8 User Manual - "baby" Icon.
14
After turning on VOX the LCD will display
icon. Press
PTT to confirm and quit or press "
" key once to confirm
and continue to the next menu feature.
You can plug in the earphone for hands-free talking &
listening.
The VOX feature works best when speaking directly into (or
close to) the microphone on the radio or on the external
headset.
(14) STOPWATCH
Press the
key 5 times, LCD display
Press
or
key once to start.
Press
or
key once to stop.
Press to reset.
Press
key 4 times to exit.
Whilst in stopwatch mode, you can
transmit and receive the radio signal.
(15) LAP TIME
In stopwatch mode, you can get a lap time by below steps:
Press
or
key once to start.
Press
key to stop and LCD show the lap time while the
stopwatch is running.
Then press
again, it will resume to stopwatch and show the
running time.
Press
or
key once to stop.
Press to reset.
Press
key 4 times to exit.
(16) BABY MONITOR
Set baby monitor mode only on the radio to be placed next
to the baby. This baby monitor use noise activation to begin
transmitting so the baby’s cries will be transmitted.
Press the"
" key 6 times and the LCD will display the
"Baby" icon.
Press the " " or " " key to monitor sensitivity level from 1
to 3 (low to high level), OF is turn OFF this function. Place
the radio within 1m of the baby.