Zavio S5040 Quick Installation Manual - page 3
2
3
Physical Overview
a. Front Panel
1.
Power button: Power On/Off NVR
2.
LED Indicator Definition
LED
Color
Indication
Power
Flash Blue
Booting up process
Steady Blue Booting up competition
Warning
Red
System exception alert is detected
, such as disk
full, disk error, no disk, network disconnect, illegal
login, disk over temperature, fan fail, network fail,
power loss and IP conflict.
HD
Blue
System is accessing hard disk
LAN
Blue
NVR is connecting to LAN port
WAN
Blue
NVR is connecting to WAN port
3.
USB port : USB port for connecting devices, such as USB mouse or USB flash device.
b. Rear Panel
1.
Audio In: Connect the microphone or camera audio output to the audio input connector.
2. Audio Out: Connect a speaker or other audio output device to the audio output connector.
3. VGA: Connect a VGA monitor to the VGA output connector.
4. HDMI: Connect a HDMI monitor to the HDMI output connector.
5. LAN: Connect hub with IP cameras via RJ-45 network cable.
6. WAN: Connect NVR to Internet via a RJ-45 network cable.
7. RS485 socket: For RS485 PTZ control.
8. Alarm In: Connect to 4 or 8 alarm inputs to the alarm input connectors.
9. Alarm Out: N.C or N.O type alarm signal out.
10. Power: Plug the DC12V power source into the power socket.
10
9
8
7
6
5
4
3
2
1
2
1