ZBoost ZB560Y Manual - page 11
zBoost
®
Cellular REACH ZB560Y Manual
4
Before installing, please note the following important factors in determining your zBoost
performance:
•
At least 15 vertical feet is needed between the External Antenna (receives the outside signal)
and the Indoor Antenna (rebroadcasts the signal indoors). Separation less than 15 vertical feet
will result in decreased performance. See illustration below.
•
Keep the External Antenna at least 3 feet above any metal.
See page 6, Setting Up Your zBoost Signal Booster, for additional information.
Antenna Bracket Assembly
IMPORTANT: Incorrectly mounting the External Antenna to
the mounting bracket will impede performance. Ensure that
the External Antenna is properly positioned in the mounting
bracket as pictured below.
To mount antenna to a pole: Attach the antenna to pole
bracket as pictured. Use U-Bolt to secure bracket to pole and
fasten.
To mount antenna to a flat surface: Secure bracket to
desired surface using provided screws. Use of the Saddle and
U-Bolt are not necessary for this option.
Additional Cable Requirements
If the distance between the External Antenna and the Base Unit exceeds 50 feet, extension cables
are available on our website. The included cable is RG-6. For better performance, you may replace
it with RG-11 cable for satellite TV.
The total cable length should not exceed 65 feet unless you also purchase an upgraded External
Antenna (see page v). A longer cable is helpful only if it allows you to place the External
Antenna in a location where you measure stronger signal.
Maximum Performance
Minimum Performance
15’ of vertical
separation
15’ of vertical
separation
15’ of vertical
separation