ZBoost ZB560Y Manual - page 18
zBoost
®
Cellular REACH ZB560Y Manual
11
Technical Specifications
Product Specifications for zBoost Cellular REACH ZB560Y
Cellular band
Frequency
Uplink: 824 to 849 MHz
Downlink: 869 to 894 MHz
System Gain
71 dB
CEL band supported
A, B, A’, B’
Networks
CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
Output power
UL: 21 dBm; DL: 4 dBm
General
Power Consumption
3W standby; 7W max signal - 5.0VDC, 2.0A Max
Wall Supply Input ; Voltage
100-240VAC, 50-60 Hz
Input and Output Impedance
TNC Connector: 50 Ohm; F Connector: 75 Ohm
System Certifications
FCC Parts 15 & 20, Industry Canada
Base Unit Size and Weight
5” x 7” x 1.25” – 9 oz.
Operating Conditions
Indoor Use Only (40° - 105° F)
Coverage area
7,500 sq. ft.
The Manufacturer’s rated output power of this equipment is for single carrier operation. For
situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB,
especially where the output signal is re-radiated and can cause interference to adjacent band users.
This power reduction is to be by means of input power or gain reduction and not by an attenuator at
the output of the device.
This product is covered by patent US 7,706,744. Other U.S. and foreign patents pending.