Zebex Barcode scanner Quick Referenc Manual - Power Supply

4

Power Supply 

Use only original factory battery and the charging equipments. 

Using any other type of battery and charging equipment may damage the scanner 

and invalidate the warranty. 

Do not short the battery terminals. The battery could overheat. 

Do not attempt to split or peel the outer casing. 

Remove the battery if the scanner is not going to be used for a long time. If the 

battery is left unused for more than 3 months, you need to charge the battery 

before use. 

Wireless Communication 

Wireless technology operates 100M / 75M with communication cradle. 

Maximum communication range may vary depending on obstacles 

(person, metal, wall, etc.) or electromagnetic environment. 

The following conditions may affect the sensitivity of wireless 

communication. 

There is an obstacle such as a person, metal, or wall between 

this unit and wireless device. 

A device using 2.4 GHz frequency, such as a wireless LAN device, 

cordless telephone, or microwave oven, is in use near this unit. 

Because wireless devices and wireless LAN (IEEE802.11b/g) use the 

same frequency, microwave interference may occur and resulting in 

communication speed deterioration, noise, or invalid connection if this 

unit is used near a wireless LAN device. In such a case, perform the 

following. 

Use this unit at least 10 m (about 30 ft) away from the wireless 

LAN device. 

If this unit is used within 10 m (about 30 ft) of a wireless LAN 

device, turn off the wireless LAN device. 

Install this unit and wireless device as near to each other as 

possible. 

Microwaves emitting from a wireless device may affect the operation of 

electronic medical devices. Turn off this unit and other wireless devices 

in the following locations, as it may cause an accident. 

Where inflammable gas is present, in a hospital, train, airplane, 

or a petrol station