Zebex Z-3051BT User Manual - Maintenance

Handheld Bluetooth® CCD/Laser Scanner 

25 

U

SER

’

S 

M

ANUAL

Maintenance 

This device provides reliable and efficient operation with a minimum of care.    Although 

specific maintenance is not required, as to prolong the operating life of the device, the 

following precautions needs to be ensured. 

Cleaning the Window and Housing 

Any visibly dirty, or scratch on the scanner window will degrade reading performance, 

therefore do not use abrasive wipes or tissues on the window.    When the scanner is not 

operating, use a soft cloth or lens tissue and gently wipe the scanning window lens. 

Do not spread liquid or submerge into liquid in any circumstance.   

Never use solvents (e.g., acetone, benzene, ether, or phenol-based agents) on the 

housing or window, solvents may damage the housing finish or the window. 

Inspecting on Interface Cables 

Inspect regularly on the interface cables and its connectors, a badly worn or damaged 

cable or connecters may interfere the scanning operation.    Contact your distributor for 

information on cable replacement. 

Battery 

The lifetime of rechargeable batteries would rely on the number of times the batteries 

are recharged. Hence, we recommend users to keep default setting and charge in Smart 

Charge mode (Refer to Section 2.1 for Charging Details).    In general, we recommend 

charge the scanner at the end of each working day or when the scanner requires charging.