Zebra 170PAX4 Quick Reference Manual - page 6
EN-4
170PAX4 Quick Reference Guide
05/24/2005
57517L-001 Rev. A
Quick Reference Guide
Front Panel
Front Panel Indicator Lights (LEDs)
The front panel lights are described in
Table 8
.
FEED
Feeds a blank label.
• If the print engine is idle or paused, the label is fed immediately.
• If the print engine is printing, the label is fed after the current batch prints.
CALIBRATE
CALIBRATE
functions only in Pause mode. Press
CALIBRATE
to recalibrate for proper
media length, to set media type (continuous/non-continuous), and to set print method
(direct thermal/thermal transfer).
Table 7 • Front Panel Buttons (Continued)
Button
Description/Function
Table 8 • Front Panel Lights
LED
OFF Indicates
ON Indicates
FLASHING Indicates
POWER
(Green)
Print engine is
OFF, or no power
to print engine.
Power switch is ON, and power is being
supplied to print engine.
—
PAUSE
(Yellow)
Normal operation.
One of the following:
• Print engine is paused because of an
error condition (printhead, ribbon, or
paper error). Usually occurs in
conjunction with another LED.
•
PAUSE
was pressed.
• A pause was requested from the
Applicator Port.
• A pause was received as part of the
label format.
—
DATA
(Green)
No data being
received or
processed.
Data is processing or printing is taking
place. No data is being received.
Print engine is receiving data
from or sending status
information to the host
computer.
MEDIA
(Yellow)
Normal operation.
Media properly
loaded.
Out of media. (Print engine is paused,
LCD displays error message, and
PAUSE light is ON).
—
RIBBON
(Yellow)
Normal operation.
Ribbon properly
loaded.
Ribbon in when print engine is in direct
thermal mode, or no ribbon in when
print engine is in thermal transfer mode.
Print engine is paused, LCD displays
error message, and PAUSE light is ON.
—
ERROR
(Orange)
No print engine
errors.
—
Print engine error exists.
Check the LCD for status.