1. DL manuals
  2. Zebra
  3. Printer
  4. GX420t
  5. Instruction Manual

Zebra GX420t Instruction Manual

Summary of GX420t

  • Page 1

    Product catalog xive ® versatility and simplicity implant system.

  • Page 2

    Xive plus implant system – designed for accelerated treatment with high primary stability in all bone qualities. The xive plus d 3.0 implant is an option uniquely designed for narrow restorative spaces (congenitally missing or post-orthodontic maxillary lateral incisor spaces, as well as mandibular ...

  • Page 3

    Implant diameters d 3.0 d 3.4 d 3.8 d 4.5 d 5.5 xive plus • • • • • xive tg plus • • • • cases: • with atrophied ridges where augmentation is not desired or indicated • with multiple implant restorations in posterior regions • where a parallel wall implant design is advantageous, particularly in the...

  • Page 4

    7 6 pre-surgical planning 261510 xive depth gauge 2 d 2.0 261500 xive select try-in implant basic set the basic set contains one xive select try-in implant for each implant diameter (d 3.0 – d 5.5). Xive select try-in implant 2 261520 – • d 3.0 261530 – • d 3.4 261540 – • d 3.8 261550 – • d 4.5 2615...

  • Page 5

    9 8 implant placement implants (sterile) xive plus implant contents: screw implant, 2 tempbase, 2 cover screw 2 260122 – • d 3.0/l 11 260123 – • d 3.0/l 13 260125 – • d 3.0/l 15 260131 – • d 3.4/l 9.5 260132 – • d 3.4/l 11 260133 – • d 3.4/l 13 260135 – • d 3.4/l 15 260138 – • d 3.4/l 18 260140 – • ...

  • Page 6

    261115 xive twist drill, posterior 6 d 2.0/l 8–15 261118 xive twist drill, anterior 6 d 2.0/l 8–18 261110 xive round drill 6 xive twist drill, posterior 6 261125 – • d 3.0/l 8–15 261135 – • d 3.4/l 8–15 261145 – • d 3.8/l 8–15 261155 – • d 4.5/l 8–15 261165 – • d 5.5/l 8–15 xive twist drill, anterio...

  • Page 7

    Crestal preparation utilize the xive crestal twist drill to control the amount of implant internal condensation. Xive crestal twist drill the crestal drill depth preparation ranges from 2 mm to 6 mm based on the bone quality, allowing optimal primary stability of the implant to be reached. 13 12 xiv...

  • Page 8

    15 14 instruments for implant placement 261200 xive expert security kit (posterior/anterior) the xive security kit contains all of the depth stops required for using the xive twist drills (listed below). The xive depth stops are supplied in the xive security tray. - depth stop posterior d 2.0–d 3.0/...

  • Page 9

    17 16 instruments for implant placement 261180 xive tap set 4 one tap per diameter d 3.0 – d 5.5 xive tap 4 261121 – • d 3.0 261131 – • d 3.4 261141 – • d 3.8 261151 – • d 4.5 261161 – • d 5.5 261190 xive tap box (empty) 268010 xive surgical tray (empty) 465880 friadent straight implant driver this ...

  • Page 10

    261510 xive depth gauge 2 d 2.0 455709 friadent ratchet 6 , without insert 455711 friadent ratchet insert for implant driver 6 friadent ratchet implant driver 2 465810 – • posterior for implant level d 3.0 465912 – • • • • posterior implant level d 3.4 and tempbase 465820 – • anterior for implant le...

  • Page 11: Friadent

    Implant diameters/prosthetic diameters d 3.0 d 3.4 d 3.8 d 4.5 d 5.5 xive plus implants • • • • • xive tg plus implants • * • * • * * 4.8 mm prosthetic diameter. Dentsply friadent ® prosthetics 21 friadent cerabase friadent aurobase friadent mp transfer or pickup impression coping friadent mp cover ...

  • Page 12

    At gingival level (mp abutment) (pages 36-40) 23 22 friadent ® prosthetics uncovery at uncovery, based on indications, you can choose how to fabricate the superstructure: • from the implant level or • from the gingival level (mp abutment). The components are selected based on the prosthetic treatmen...

  • Page 13

    25 24 soft tissue management, provisional restorations prosthetic fabrication at implant level: friadent gingiva former 2 (slim) 451232 – • d 3.4/gh 2 451233 – • d 3.4/gh 3 451235 – • d 3.4/gh 5 451242 – • d 3.8/gh 2 451243 – • d 3.8/gh 3 451245 – • d 3.8/gh 5 451252 – • d 4.5/gh 2 451253 – • d 4.5/...

  • Page 14

    27 26 friadent lab set transfer impression the lab set transfer impression contains a transfer coping, transfercap (d 3.0 – d 5.5), standard abutment screw (d 3.0 with abutment screw d 3.0) and an implant analog (see pictured diagram on left). 468123 – • d 3.0/gh 3 468125 – • d 3.0/gh 5 468133 – • d...

  • Page 15

    29 28 464304 • friadent standard abutment screw 4 d 3.0 454305 • • • • friadent standard abutment screw 4 461605 • friadent pickup guide 4 d 3.0 451615 • • • • friadent pickup guide 4 abutment screws and guide pins are seated with the 1.22 mm friadent hex driver or the 2.0 mm (blade width) friadent ...

  • Page 16

    31 30 estheticbase abutments friadent estheticbase straight / a 0 screw for estheticbase 4 (d 3.0 with abutment screw 4 d 3.0). 462121 – • d 3.0/gh 1 4 462122 – • d 3.0/gh 2 4 462123 – • d 3.0/gh 3 4 462125 – • d 3.0/gh 5 4 462131 – • d 3.4/gh 1 4 462132 – • d 3.4/gh 2 4 462133 – • d 3.4/gh 3 4 4621...

  • Page 17

    33 32 horizontal screws 464403 friadent horizontal screw set, standard with horizontal screw standard 4 and horizontal screw seat 8 464404 friadent horizontal screw set, long with horizontal screw long 4 and horizontal screw seat 8 464407 friadent transverse screw set, standard with transversal scre...

  • Page 18

    35 34 cast-to abutments friadent aurobase 20/8 with standard abutment screw 4 (d 3.0 with abutment screw 4 d 3.0). 452420 – • d 3.0 452430 – • d 3.4 452440 – • d 3.8 452450 – • d 4.5 452460 – • d 5.5 telescopic abutments friadent telescopic abutment with standard abutment screw 4 (d 3.0 with abutmen...

  • Page 19

    37 friadent mp abutment 2 mp abutment insert and mp insert screw. 462831 – • d 3.4/gh 1 462832 – • d 3.4/gh 2 462833 – • d 3.4/gh 3 462835 – • d 3.4/gh 5 462841 – • d 3.8/gh 1 462842 – • d 3.8/gh 2 462843 – • d 3.8/gh 3 462845 – • d 3.8/gh 5 462849 – • d 3.8/gh 9 (will be discontinued when stock is ...

  • Page 20

    39 impressions prosthetic fabrication at the gingival level (mp abutment): 38 bars prosthetics/laboratory prosthetic fabrication at the gingival level (mp abutment): prod. No. Description prod. No. Description friadent mp transfer impression coping 2 461635 – • d 3.4 461645 – • d 3.8 461655 – • d 4....

  • Page 21

    40 41 waxing sleeves friadent castable waxing sleeve 21 454330 – • d 3.4 454340 – • d 3.8 454350 – • d 4.5 454360 – • d 5.5 friadent cast-to waxing sleeve 21/8 454630 – • d 3.4 454640 – • d 3.8 454650 – • d 4.5 454660 – • d 5.5 castable waxing sleeve: prior to bridge delivery, smooth the contact sur...

  • Page 22

    43 42 instruments for impression/prosthetics/laboratory 455709 friadent ratchet 6 (without inserts) friadent ratchet hex driver 6 (with torque limit) 455732 – width 0.9 mm/14ncm/short 455733 – width 0.9 mm/14ncm/long 455734 – width 1.22 mm/24ncm/short 455736 – width 1.22 mm/24ncm/long friadent ratch...

  • Page 23

    Prod. No. Description xive tg plus • • • implant diameters d 3.4 d 3.8 d 4.5 xive tg plus implant • • • 44 instrument sets impression/prosthetics xive tg plus transgingival implant if function is your main concern, then the one-piece xive tg plus implant may be your answer. The xive tg plus implant ...

  • Page 24

    47 cases: • where a transgingival implant design is indicated • where temporary and final components are needed for simple and fast prosthetic restoration • requiring increased primary stability for early or immediate implant function* • with atrophied ridges where augmentation is not desired or ind...

  • Page 25

    49 48 implants implants (sterile) xive tg transgingival screw implant screw implant 3 , adapter screw 250131 – • d 3.4/l 9.5 (xive tg cover screw must be ordered separately) 250132 – • d 3.4/l 11 (xive tg cover screw must be ordered separately) 250133 – • d 3.4/l 13 (xive tg cover screw must be orde...

  • Page 26

    51 50 xive ® tg prosthetics components are selected based on your prosthetic treatment plan impressions single crowns bridges overdentures xive tg transfer impression coping xive tg abutment straight or angled 15° xive tg abutment straight or angled 15° xive tg gold, titanium or castable bar coping ...

  • Page 27

    254010 • • • xive tg implant soldering analog 6 d 3.4 – d 4.5 bridges 254245 • • • xive tg castable waxing sleeve 21 d 3.4 – d 4.5 with tg abutment screw 254246 • • • xive tg cast-to waxing sleeve 21/8 d 3.4 – d 4.5 with tg abutment screw 254300 • • • xive tg abutment screw 4 d 3.4 – d 4.5 soldering...

  • Page 28

    55 54 455709 friadent ratchet 6 without inserts friadent ratchet hex driver 6 with torque limit 455732 – width 0.9 mm/14ncm/short 455733 – width 0.9 mm/14ncm/long 455734 – width 1.22 mm/24ncm/short 455736 – width 1.22 mm/24ncm/long friadent hand piece hex driver 6 465710 – width 0.9 mm/short 465720 ...

  • Page 29

    Ml-0510c 12/07 © 2007 dentsply international, inc. Dentsply tulsa dental specialties dentsply international, inc. 5100 e. Skelly drive, suite 300 tulsa, ok 74135 1-800-662-1202 1-800-597-2779 (fax) www.Tulsadentalspecialties.Com products manufactured by.