Product catalog xive ® versatility and simplicity implant system.
Xive plus implant system – designed for accelerated treatment with high primary stability in all bone qualities. The xive plus d 3.0 implant is an option uniquely designed for narrow restorative spaces (congenitally missing or post-orthodontic maxillary lateral incisor spaces, as well as mandibular ...
Implant diameters d 3.0 d 3.4 d 3.8 d 4.5 d 5.5 xive plus • • • • • xive tg plus • • • • cases: • with atrophied ridges where augmentation is not desired or indicated • with multiple implant restorations in posterior regions • where a parallel wall implant design is advantageous, particularly in the...
7 6 pre-surgical planning 261510 xive depth gauge 2 d 2.0 261500 xive select try-in implant basic set the basic set contains one xive select try-in implant for each implant diameter (d 3.0 – d 5.5). Xive select try-in implant 2 261520 – • d 3.0 261530 – • d 3.4 261540 – • d 3.8 261550 – • d 4.5 2615...
9 8 implant placement implants (sterile) xive plus implant contents: screw implant, 2 tempbase, 2 cover screw 2 260122 – • d 3.0/l 11 260123 – • d 3.0/l 13 260125 – • d 3.0/l 15 260131 – • d 3.4/l 9.5 260132 – • d 3.4/l 11 260133 – • d 3.4/l 13 260135 – • d 3.4/l 15 260138 – • d 3.4/l 18 260140 – • ...
261115 xive twist drill, posterior 6 d 2.0/l 8–15 261118 xive twist drill, anterior 6 d 2.0/l 8–18 261110 xive round drill 6 xive twist drill, posterior 6 261125 – • d 3.0/l 8–15 261135 – • d 3.4/l 8–15 261145 – • d 3.8/l 8–15 261155 – • d 4.5/l 8–15 261165 – • d 5.5/l 8–15 xive twist drill, anterio...
Crestal preparation utilize the xive crestal twist drill to control the amount of implant internal condensation. Xive crestal twist drill the crestal drill depth preparation ranges from 2 mm to 6 mm based on the bone quality, allowing optimal primary stability of the implant to be reached. 13 12 xiv...
15 14 instruments for implant placement 261200 xive expert security kit (posterior/anterior) the xive security kit contains all of the depth stops required for using the xive twist drills (listed below). The xive depth stops are supplied in the xive security tray. - depth stop posterior d 2.0–d 3.0/...
17 16 instruments for implant placement 261180 xive tap set 4 one tap per diameter d 3.0 – d 5.5 xive tap 4 261121 – • d 3.0 261131 – • d 3.4 261141 – • d 3.8 261151 – • d 4.5 261161 – • d 5.5 261190 xive tap box (empty) 268010 xive surgical tray (empty) 465880 friadent straight implant driver this ...
261510 xive depth gauge 2 d 2.0 455709 friadent ratchet 6 , without insert 455711 friadent ratchet insert for implant driver 6 friadent ratchet implant driver 2 465810 – • posterior for implant level d 3.0 465912 – • • • • posterior implant level d 3.4 and tempbase 465820 – • anterior for implant le...
Implant diameters/prosthetic diameters d 3.0 d 3.4 d 3.8 d 4.5 d 5.5 xive plus implants • • • • • xive tg plus implants • * • * • * * 4.8 mm prosthetic diameter. Dentsply friadent ® prosthetics 21 friadent cerabase friadent aurobase friadent mp transfer or pickup impression coping friadent mp cover ...
At gingival level (mp abutment) (pages 36-40) 23 22 friadent ® prosthetics uncovery at uncovery, based on indications, you can choose how to fabricate the superstructure: • from the implant level or • from the gingival level (mp abutment). The components are selected based on the prosthetic treatmen...
25 24 soft tissue management, provisional restorations prosthetic fabrication at implant level: friadent gingiva former 2 (slim) 451232 – • d 3.4/gh 2 451233 – • d 3.4/gh 3 451235 – • d 3.4/gh 5 451242 – • d 3.8/gh 2 451243 – • d 3.8/gh 3 451245 – • d 3.8/gh 5 451252 – • d 4.5/gh 2 451253 – • d 4.5/...
27 26 friadent lab set transfer impression the lab set transfer impression contains a transfer coping, transfercap (d 3.0 – d 5.5), standard abutment screw (d 3.0 with abutment screw d 3.0) and an implant analog (see pictured diagram on left). 468123 – • d 3.0/gh 3 468125 – • d 3.0/gh 5 468133 – • d...
29 28 464304 • friadent standard abutment screw 4 d 3.0 454305 • • • • friadent standard abutment screw 4 461605 • friadent pickup guide 4 d 3.0 451615 • • • • friadent pickup guide 4 abutment screws and guide pins are seated with the 1.22 mm friadent hex driver or the 2.0 mm (blade width) friadent ...
31 30 estheticbase abutments friadent estheticbase straight / a 0 screw for estheticbase 4 (d 3.0 with abutment screw 4 d 3.0). 462121 – • d 3.0/gh 1 4 462122 – • d 3.0/gh 2 4 462123 – • d 3.0/gh 3 4 462125 – • d 3.0/gh 5 4 462131 – • d 3.4/gh 1 4 462132 – • d 3.4/gh 2 4 462133 – • d 3.4/gh 3 4 4621...
33 32 horizontal screws 464403 friadent horizontal screw set, standard with horizontal screw standard 4 and horizontal screw seat 8 464404 friadent horizontal screw set, long with horizontal screw long 4 and horizontal screw seat 8 464407 friadent transverse screw set, standard with transversal scre...
35 34 cast-to abutments friadent aurobase 20/8 with standard abutment screw 4 (d 3.0 with abutment screw 4 d 3.0). 452420 – • d 3.0 452430 – • d 3.4 452440 – • d 3.8 452450 – • d 4.5 452460 – • d 5.5 telescopic abutments friadent telescopic abutment with standard abutment screw 4 (d 3.0 with abutmen...
37 friadent mp abutment 2 mp abutment insert and mp insert screw. 462831 – • d 3.4/gh 1 462832 – • d 3.4/gh 2 462833 – • d 3.4/gh 3 462835 – • d 3.4/gh 5 462841 – • d 3.8/gh 1 462842 – • d 3.8/gh 2 462843 – • d 3.8/gh 3 462845 – • d 3.8/gh 5 462849 – • d 3.8/gh 9 (will be discontinued when stock is ...
39 impressions prosthetic fabrication at the gingival level (mp abutment): 38 bars prosthetics/laboratory prosthetic fabrication at the gingival level (mp abutment): prod. No. Description prod. No. Description friadent mp transfer impression coping 2 461635 – • d 3.4 461645 – • d 3.8 461655 – • d 4....
40 41 waxing sleeves friadent castable waxing sleeve 21 454330 – • d 3.4 454340 – • d 3.8 454350 – • d 4.5 454360 – • d 5.5 friadent cast-to waxing sleeve 21/8 454630 – • d 3.4 454640 – • d 3.8 454650 – • d 4.5 454660 – • d 5.5 castable waxing sleeve: prior to bridge delivery, smooth the contact sur...
43 42 instruments for impression/prosthetics/laboratory 455709 friadent ratchet 6 (without inserts) friadent ratchet hex driver 6 (with torque limit) 455732 – width 0.9 mm/14ncm/short 455733 – width 0.9 mm/14ncm/long 455734 – width 1.22 mm/24ncm/short 455736 – width 1.22 mm/24ncm/long friadent ratch...
Prod. No. Description xive tg plus • • • implant diameters d 3.4 d 3.8 d 4.5 xive tg plus implant • • • 44 instrument sets impression/prosthetics xive tg plus transgingival implant if function is your main concern, then the one-piece xive tg plus implant may be your answer. The xive tg plus implant ...
47 cases: • where a transgingival implant design is indicated • where temporary and final components are needed for simple and fast prosthetic restoration • requiring increased primary stability for early or immediate implant function* • with atrophied ridges where augmentation is not desired or ind...
49 48 implants implants (sterile) xive tg transgingival screw implant screw implant 3 , adapter screw 250131 – • d 3.4/l 9.5 (xive tg cover screw must be ordered separately) 250132 – • d 3.4/l 11 (xive tg cover screw must be ordered separately) 250133 – • d 3.4/l 13 (xive tg cover screw must be orde...
51 50 xive ® tg prosthetics components are selected based on your prosthetic treatment plan impressions single crowns bridges overdentures xive tg transfer impression coping xive tg abutment straight or angled 15° xive tg abutment straight or angled 15° xive tg gold, titanium or castable bar coping ...
254010 • • • xive tg implant soldering analog 6 d 3.4 – d 4.5 bridges 254245 • • • xive tg castable waxing sleeve 21 d 3.4 – d 4.5 with tg abutment screw 254246 • • • xive tg cast-to waxing sleeve 21/8 d 3.4 – d 4.5 with tg abutment screw 254300 • • • xive tg abutment screw 4 d 3.4 – d 4.5 soldering...
55 54 455709 friadent ratchet 6 without inserts friadent ratchet hex driver 6 with torque limit 455732 – width 0.9 mm/14ncm/short 455733 – width 0.9 mm/14ncm/long 455734 – width 1.22 mm/24ncm/short 455736 – width 1.22 mm/24ncm/long friadent hand piece hex driver 6 465710 – width 0.9 mm/short 465720 ...
Ml-0510c 12/07 © 2007 dentsply international, inc. Dentsply tulsa dental specialties dentsply international, inc. 5100 e. Skelly drive, suite 300 tulsa, ok 74135 1-800-662-1202 1-800-597-2779 (fax) www.Tulsadentalspecialties.Com products manufactured by.