Zebra TC70x Quick start manual - page 9
TC70x Touch Computer Quick Start Guide with Windows 10 IoT Mobile Enterprise
9
•
TC7X Vehicle Communication Cradle
•
Auto Charging Cable Cup.
•
Serial Cable Cup
The 4,620 mAh fully depleted battery fully charges in less than five hours at room temperature.
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The TC70x or accessory always performs
battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F)) the
TC70x or accessory may for small periods of time alternately enable and disable battery charging to keep the
battery at acceptable temperatures. The TC70x or accessory indicates when charging is disabled due to abnormal
temperatures via its LED.
1.
To charge the main battery, connect the charging accessory to the appropriate power source.
2.
Insert the TC70x into a cradle or attach to a cable. The TC70x turns on and begins charging. The
Charging/Notification LED blinks amber while charging, then turns solid green when fully charged.
Charging Indicators
Table 3 Charging/Notification LED Charging Indicators
State
Indication
Off
TC70x is not charging. TC70x is not inserted correctly in the cradle or
connected to a power source. Charger/cradle is not powered.
Slow Blinking Amber (1 blink every 2
seconds)
TC70x is charging.
Solid Green
Charging complete.
Fast Blinking Amber (2 blinks/second)
Charging error, e.g.:
•
Temperature is too low or too high.
•
Charging has gone on too long without completion (typically
eight hours).
Slow Blinking Red (1 blink every 2
seconds)
TC70x is charging but the battery is at end of useful life.
Solid Red
Charging complete but the battery is at end of useful life.
Fast Blinking Red (2 blinks/second)
Charging error but the battery is at end of useful life., e.g.:
•
Temperature is too low or too high.
•
Charging has gone on too long without completion (typically
eight hours).