ZeeVee ZyPerMX User Manual - page 12
18
19
Basic Operation
Recovering a Lost Password
The ZyPerMX does not provide any built-in safeguards for lost or forgotten passwords.
The ZyPerMX must be reset to factory-default settings using the reset button on the rear
panel. Use the
admin passowrd to login and then change the password under the Device
tab.
1. Locate the
reset button on the rear panel of the unit, next to the POWER receptacle.
The button is recessed to prevent the unit from being accidentally reset.
2. Press and hold the reset button, using the end of a paperclip or other pointed object.
Wait approximately 5-10 seconds, then release the button.
3. After about 60 seconds, the unit will be ready for use.
4. Follow the steps under
Setting the Password (page 17)
to complete the process.
High Performance
Video Encoder
IP Streaming Output
ZyPerMX
POWER
STATUS
High Performance
Video Encoder
IP Streaming Output
ZyPerMX
POWER
MEDIA INPUT
HDMI In
up to 1080p
+12VDC 1.0A
reset
Ethernet (POE)
10/100/1000
TRANSPORT
reset button
Basic Operation
Updating the Firmware
Firmware updates will be available when required. Contact Technical Support for more
information.
1. Download the firmware to the desired location on your computer.
2. Login to the Maestro web interface. See
The Maestro Web Interface (page 4)
for
more information.
3. Click the
Device tab.
4. Click the
Update button, under Actions.
5. The following dialog will be displayed. Click the
Browse button to select the firmware
file.
6. Click the Apply button to begin the firmware update process.
7. Once the firmware as been applied, the ZyPerMX will automatically reboot.
8. The firmware update process is now complete and the unit is ready for use.