Zeiss Axiocam 503 color User Manual - page 19
5 Connecting the Camera | 5.5 Connecting the trigger cable
User Guide Axiocam 503 color/mono | V 3.0 en 06/2016
19
Power is supplied via the USB 3.0 cable. The USB 2.0 cable supplies the peletier
cooling. By switching off the PC, the camera will be switched of as well. If the
camera is assembled correctly, the status LED will light red. If you start the software
the LED will turn blue. You`ll find a detailed description of the LED status light in the
chapter Function indicator
5.5 Connecting the trigger cable
|
5.5
Connecting the trigger cable
In this chapter you will learn how to connect the trigger cable (optional) to the
camera and the SVB (signal distribution box).
Fig. 5.2: Trigger cable
Number
Description
1
Trigger (Trigger-In)
2
GPO 0 (Trigger Out, for exposure time incl. predelay,
coresponding to shutter control
3
GPO 1 (Trigger Ready, for Readout Time data)
4
GPO 2
5
GPOPWR
6
AUXPWR
7
Commercial Micro-D
INFO
The numbers in brackets in the guide below refer to the connectors shown in
the illustration "Trigger cable" and described in the table below it.