Zeiss Axiocam 503 color User Manual - 8 Maintenance
8 Maintenance | 8.1 Optical System
User Guide Axiocam 503 color/mono | V 3.0 en 06/2016
25
8 Maintenance
8.1 Optical System
|
8.1
Optical System
The internal optical components of the camera should always be protected. If no
lens, or TV adapter with optics, is screwed into the camera's C-Mount thread, the
camera's sensor and protective glass must be protected by screwing the protective
cap onto the camera's C-Mount thread.
8.2 Cleaning the infrared filter or protective glass
|
8.2
Cleaning the infrared filter or protective glass
Contamination of the IR filter (for color cameras only) or the protective glass has an
adverse effect on the quality of the resulting image (dark points, cloudy structures
in the image). If there is dry dust on the front side of the infrared filter or protective
glass, you can remove it with a soft brush or with cotton (wool). Use cleaning fluid
for optics/lenses only to clean the IR filter. Do not use tap water to clean the IR
filter.