Zeiss Axiocam 503 color User Manual - page 20
Manual is about: Microscope Camera
of
27
5 Connecting the Camera | 5.5 Connecting the trigger cable
20
User Guide Axiocam 503 color/mono | V 3.0 en 06/2016
Procedure 1
Plug the connector Commercial Micro D (7) in the trigger connector on the
back of the camera, see Camera Overview [
}
16].
2
Plug the connector Trigger (1) in the socket Trigger Out of the SVB (Signal
distribution box).
Fig. 5.3: Signal distribution box (SVB) backside
3
Plug the connector GPO 0 (2) in the socket Trigger In 1 of the SVB (Signal
distribution box).
4
Plug the connector GPO 1 (3) in the socket Trigger In 2 of the SVB.
5
Connect the connectors GPOPWR (5) and AUXPWR (6) of the trigger cable
together.
GPO 2 (4) is not connected.