Zeiss Stemi 508 Operating Manual - page 26
ZEISS
INSTALLATION
Stereo microscope
Connecting stereo microscope to the power supply
Stemi 508
24
435064-7044-010
06/2015
Engl
ish
3.4
Connecting stereo microscope to
the power supply
•
Insert the mains cable (Fig. 13/2) in the mains
supply socket (Fig. 13/1) of the stand.
•
Connect the mains cable (Fig. 13/2) to a mains
supply socket outlet.
3.5
Switching stereo microscope ON or
OFF
•
Use the power switch (Fig. 13/3) to switch the
stereo microscope ON or OFF.
Safe disconnection from the power supply is ensured exclusively by removing the mains plug.
The switch on the stereo microscope only switches into standby mode.
Do not replace detachable mains cables by inadequately designed mains cables. Only the
specified power supply lines may be used.
Fig. 13 Connecting the stereo microscope