Zelmer ZHB1004P User Manual - B C
47
Wall mount
ZHB1004P
ZHB1004S
To fix the support to a wall, drill two holes and attach the
support by means of the wall plugs and screws supplied with
the appliance.
Use
The blender is suitable for preparing mayonnaise, puree,
compotes, milkshakes, jams, baby food or for chopping up
small quantities of walnuts or almonds.
The blender is not suitable for preparing
mashed potato.
Before assembling and removing the blending
foot, make sure, that the plug of the supplying
cord is disconnected from the power outlet.
●
Slot the foot (5) onto the blender’s motor housing (1) and
twist it to the left (anticlockwise)
D
.
●
Place the food you wish to process with the blender into
the corresponding jug (7).
●
Hold the blender and the jug. To stop the food from
splashing out during use, only switch the blender on or off
when the foot is immersed in the food being processed.
To switch the blender on, press button (2)
E
. For
maximum speed, press button (3)
E
.
SPEED SELECTOR
The speed selector allows you to adjust the speed to the
type of food being processed. Low speeds are suitable for
starting the blending process, churning, beating and mixing
ingredients, as well as whipping egg whites. Higher speeds
are suitable for beating eggs, preparing batters, etc.
Mini food processor
ZHB1004P
ZHB1004S
9
Mini food processor container
10
Mini food processor blade
11
Mini food processor lid with transmission
12
Mini food processor container lid
The mini food processor blades are very sharp.
Be very careful when assembling, disassembling
and cleaning. Never disassemble the lid from the
container before the disc stops rotating.
Never touch the blade of the mini food
processor!
Never clean the blade of the mini food processor
by hand! Always use a brush.
B C
/
F
A
The blade of the mini food processor must only
be held by the plastic handle.
OPERATING THE MINI FOOD PROCESSOR
To mince meat, chop hard cheeses, onions, aromatic herbs,
garlic, fruit, vegetables, nuts and almonds (see the table
I
).
Before mincing meat remove any bones or
gristle.
It is not allowed to grind hard products such as
coffee beans, nutmeg and ice cubes.
Before assembling and removing the motor unit
out of the mini food processor, make sure that
the plug of the supplying cord is disconnected
from the power outlet.
●
Place the mini food processor container (9) down on a flat,
clean surface.
●
Fit the blade (10) into the mini food processor container.
●
Place the food you wish to process in the container.
●
Fit the lid (11) onto the mini food processor container and
twist it to the right (clockwise) until it clicks shut.
●
Place the motor unit onto the lid with gear (11) and twist it
to the right (clockwise).
●
Hold the motor unit and the mini food processor and switch
the appliance ON/OFF.
●
Fit the lid (12) to protect the processed food
H
.
Examples of use:
Grated cheese for pasta dishes
Blend 200 g of moderately hard cheese (Emmental, etc.)
for ten second to obtain a thickly grated cheese, ideal for
sprinkling over pasta dishes.
Whisk
ZHB1004P
ZHB1004S
13
Whisk
14
Whisk gear
Only fit or remove the whisk when the appliance
is switched off.
Never insert the whisk directly in the motor unit
without using the whisk gear.
USING WHISK ATTACHMENT
To whip cream, egg whites or milk (cold milk, maximum
temperature 8°C).
●
Slot the drive mechanism into the blender’s motor unit and
twist it to the left (anticlockwise).
●
Slot the whisk into the drive mechanism.
●
Place the food you wish to whisk into the jug.
G
A
J