Zenesis Z-101 A User Manual - page 10
Button(s)
Duration
Description
Press and release
Function Button twice
→ Press and release
Trunk Button
AUX 8
Hold Brake Pedal →
Press and release
Function Button three
times→Press and
releaseLock Button
Passive Arm ON/
OFF
Hold Brake Pedal →
Press and release
Function Button three
times →Press and
release Remote Start
Button
Ignition Lock ON/
OFF
Press and release
Function Button five
times →Press and
releaseLock Button
Second car control
Hold Brake Pedal →
Press and release
Function Button four
times →Press and
release Remote Start
Button
Turbo Timer ON /
OFF / AUTO
(Normal) / AUTO
(Extreme)
Press and release
Function Button five
times →Press and
release Unlock Button
Cold/Hot Timer
Options
Hold Brake Pedal →
Press and release
Function Button three
times →Press and
release Unlock Button
Shock Sensor ON/
OFF
Hold Brake Pedal →
Press and release
Function Button four
times →Press and
release Lock Button
Safety Rearm
temperature is hotter than a set temperature or colder than a set
temperature.
3.
Hot Start Temperature
This is the threshold temperature for the Hot setting. If the vehicle’s
internal temperature goes above this value, the timer will start.
4.
Cold Start Temperature
This is the threshold temperature for the Cold setting. If the vehicle’s
internal temperature falls below this value, the timer will start.
5. Run
Time
This is the amount of time that the remote start will run for during Cold/Hot
Start.
For example, if Cold/Hot Start Timer is set to start every hour if the temperature
falls below –15˚C and remote start is to run for 25 minutes, programming would
be…
1.
Press and release
5 times.
2.
Press and release
.
3.
You will hear 5 siren chirps and see 5 parking light flashes. The remote
control will beep once and the BLUE LED will flash quickly. You are now in
Cold/Hot Start Timer Programming Mode. Follow the chart below for
programming options.
4.
Press and release
.
5.
You will also hear 1 remote control beep to signify the first button in the
sequence.
6.
Press and release
.
7.
You will hear 2 remote control beeps to signify the second button in the
sequence.
8.
Press and release
.
9.
You will hear 3 remote control beeps to signify the third button press.
10.
You will also hear 2 siren chirps and remote control beeps. You will also
see 2 parking light and BLUE LED flashes. Cold/Hot Start Timer will now
start every 1 hour.
11.
Press and release
.
12.
You will also hear 1 remote control beep to signify the first button in the
sequence.
13.
Press and release
.
14.
You will hear 2 remote control beeps to signify the second button in the
sequence.
15.
Press and release
.
16.
You will hear 3 remote control beeps to signify the third button press.
17.
You will also hear 3 siren chirps and remote control beeps. You will also