3Com 3CRWE62092A User Manual - page 17
Windows NT Installation with Networking Installed
17
Set Up the PC Card
After the computer restarts, the 3Com 11 Mbps Wireless LAN Client Setup
window opens, in which you specify the PC Card configuration.
1 In the 3Com 11 Mbps Wireless LAN Client Setup window, select Typical and
click Next.
The Typical comfiguration sets up the PC Card with the following default values:
WLAN Service Area—Attach to any WLAN Service Area automatically
Security Setting—No security (Open system)
If you want to customize the PC Card configuration (to add security, for example),
select Custom. See “Custom Installation Options” for details on custom settings.
For the fastest installation, it is recommended that you use the Typical settings.
You can customize the configuration later as described in “Setting the Wireless
Client Configuration”.
2 In the Summary window, review the PC Card setup and click Finish.
3 When prompted to run the Setup program, click OK.
4 Run the Setup program:
a From the Windows Start menu, select Run.
b In the Run dialog box, enter a path to the Setup program on the 3Com CD. For
example, d:\srsetup.exe.
The 3Com 11 Mbps Wireless LAN Setup program starts.
Install Utilities
1 Read the Welcome page and click Next.
2 Read the Software License Agreement and click Yes. (If you click No, the
installation stops.)
3 Select a destination folder for the software files and click Next.
4 In the Setup Type window, select the type of installation for the software:
Typical—Installs the software and documentation.
Compact—Installs the software but not documentation.
Custom—Allows you to choose the components to install.
5 Follow the directions in the Select Program Folder window and click Next.
6 In the Desktop Icon Option window, click Yes.
7 In the next window, if the option to restart the computer appears, select it and
click Finish.
If you had a service pack installed before setting up the PC Card, reinstall it and
restart the computer.
This completes the basic installation. To confirm the installation, see “Confirming
the Installation.”