3Com 3CRWE62092A User Manual - page 42
42
C
HAPTER
5: T
ROUBLESHOOTING
11 Read the Welcome page and click Next.
12 In the Setup Complete window, click Finish.
13 If you are prompted to restart your computer, do so.
The software is now updated.
Windows 2000
1 Turn on the power to the computer and start Windows.
2 Log in to the Windows 2000 Administrator account.
3 From the Windows Start menu, select Settings, then Control Panel.
4 Double-click the System icon.
5 In the System Properties window, select the Hardware tab.
6 In the next window, click Device Manager.
7 In the Device Manager window, expand the Network Adapters list.
8 Double-click 3Com 3CRWE62092A.
9 In the next window, select the Driver tab.
10 Click Update Driver.
11 In the Upgrade Device Driver Wizard, follow the prompts to install the upgrade:
a In the Install Hardware Device Driver window, click the Display list of known
drivers so that I can choose a specific driver radio button and click Next.
b In the next window, click Have Disk. In the dialog box, specify the directory
where you downloaded the software and click Continue.
12 When the installation is finished, click Finish.
The 3Com 11 Mbps Wireless LAN Setup window appears, in which you specify the
PC Card configuration.
13 In the 3Com 11 Mbps Wireless LAN Client Setup window, select Typical and
click Next.
For the fastest installation, it is recommended that you use the typical settings.
You can customize the configuration later. Typical configures the PC Card with the
following default values:
WLAN Service Area—Attach to any WLAN Service Area automatically
Security Setting—No security (Open system)
14 In the Summary window, review the PC Card setup. To install the software utilities,
check the Start client software installation when finished box.
15 If the 3Com WLAN Launcher is already running, it is recommended that you exit it
and end the PC Card service routine:
a In the Windows system tray, right-click the 3Com icon and select Exit.
b Press Ctrl+Alt+Delete to bring up the Close Program window.
c In the Close Program window, select SR Services and click End Task.
16 Click Finish to complete the PC Card setup and start the software
utilities installation.
The 3Com 11 Mbps Wireless LAN Setup program starts.