3Com 3CRWE62092A User Manual - page 41
Updating PC Card Driver Software
41
10 In the 3Com 11 Mbps Wireless LAN Client Setup window, select Typical and
click Next.
For the fastest installation, it is recommended that you use the typical settings.
You can customize the configuration later. Typical configures the PC Card with the
following default values:
WLAN Service Area—Attach to any WLAN Service Area automatically
Security Setting—No security (Open system)
11 In the Summary window, review the PC Card setup. To install the software utilities,
check the Start client software installation when finished box.
12 If the 3Com WLAN Launcher is already running, it is recommended that you exit it
and end the PC Card service routine by doing the following:
a In the Windows system tray, right-click the 3Com icon and select Exit.
b Press Ctrl+Alt+Delete to bring up the Close Program window.
c In the Close Program window, select SR Services and click End Task.
13 Click Finish to complete the PC Card setup and start the software utilities
installation.
The 3Com 11 Mbps Wireless LAN Setup program starts.
14 Read the Welcome page and click Next.
15 In the Setup Complete window, click Finish.
16 If you are prompted to restart your computer, do so.
The software is now updated.
Windows Millenium
Edition (Windows Me)
1 Turn on the power to the computer and start Windows.
2 From the Windows Start menu, select Settings, then select Control Panel.
3 Double-click the System icon, then select Device Manager.
4 In the Device Manager window, expand the Network Adapters list.
5 Select 3Com 3CRWE62092A and click Properties.
6 Select Driver and click Update Driver.
7 In the Update Device Driver Wizard, follow the prompts to install the upgrade.
8 When prompted, click Restart for the changes to take effect.
9 If the 3Com WLAN Launcher is already running, it is recommended that you exit it
and end the PC Card service routine:
a In the Windows system tray, right-click the 3Com icon and select Exit.
b Press Ctrl+Alt+Delete to bring up the Close Program window.
c In the Close Program window, select SR Services and click End Task.
10 Run the Setup program by doing the following:
a From the Windows Start menu, select Run.
b In the Run dialog box, enter the path to start the Setup program on the
3Com CD. For example: d:srsetup.exe.
The 3Com 11 Mbps Wireless LAN Setup program starts