3Com AccessBuilder 500 User Manual - Setting The Unit Name

1-28

C

H

A

P

T

E

R

 1: 

G

E

T

T

I

N

G

 S

T

A

R

T

E

D

Setting the Unit Name

Before you configure the unit to connect to any other network, you must 

first give the unit a name. Enter 

NA

 at the command prompt on the Quick 

Configuration screen to display the screen illustrated in 

Figure 1-15

.

The fields on this screen are:

Unit Name

 Type in a suitable name for this unit. The name can be up 

to 12 characters long, must contain no spaces and should, where 

possible, give an indication of the geographical location of the unit or 

the name of the users.

Manager LAN IP Address

 Type the IP address for this unit. It must be a 

unique IP address on your network.

Manager LAN IP Mask

 Enter an appropriate IP subnet mask. See 

“Subnet Masking”

 in 

Appendix A

 for more information about subnet 

masks.

Network Type

 Toggle the network type to match the ISDN service 

provided by your ISDN service provider.

Figure 1-15   

Setting The Unit Name