3Com AccessBuilder 500 User Manual - page 65
Manual is about: 3Com Network Device User Guide
of
124
Examples of Typical ISDN Networking Applications
1-45
Because the ISDN number can be associated with a remote network
rather than just a specific IP host, any data for the remote network can
generate an autocall and be routed over the AccessBuilder 500. If you
need to connect to IP hosts on several networks, you will need to use
routing to be able to communicate with the different hosts.
The example shown in
Figure 1-23
shows the Local Site connected to
two Remote sites over ISDN. All sites are connected using AccessBuilder
500 units.
Figure 1-23
IP Routed Network