3Com OfficeConnect WX1200 Quick Start Manual - page 8
8
W
IRELESS
LAN S
WITCH
AND
C
ONTROLLER
Q
UICK
S
TART
G
UIDE
Configuring a Mobility Domain for Roaming
This procedure configures multiple WX switches to
form a Mobility Domain. A Mobility Domain allows
users to seamlessly roam from one WX switch to
another. A Mobility Domain uses one seed switch.
The other switches are members.
Add the switches to the same VLAN. Users can be in
the same or different VLANs, and the user VLANs do
not need to be configured on all the switches. Users
can log on and roam the network from the seed
switch, or from any member switch, by tunnelling
through any other switch that contains their VLAN.
For simplicity, the quickstart command assigns all
users to the default VLAN.
Figure 2 Mobility Domain Deployment
Configuring the Seed
1
Configure WX1200-Corp as the seed:
WX1200-Corp# set mobility-domain mode seed
domain-name Corp
WX1200-Corp# set mobility-domain member
10.10.90.4
2
Verify and save the configuration changes on
WX1200-Corp.
WX1200-Corp# display config
# Configuration nvgen'd at 2004-10-13 11:02:18
...
set mobility-domain mode seed domain-name Corp
set mobility-domain member 10.10.90.4
10.10.10.4
Port
3
WX1200-C
orp
Port
2
bob
alice
Console
10.10.90.4
Port
3
WX1200-C
orp
2
Port
2
Console
Router
user1
user2
MAP
MAP
MAP
MAP
10.10.10.1
10.10.90.1