3D Systems CUBE Quick Start Manual - page 16
Manual is about: Personal 3D Printer 3rd Generation
of
32
13
NOTE: The printer will begin to heat. Wait until
the printer has finished heating and then follow
the user prompts in the touchscreen menu.
13. Insert the left material cartridge print jet into the top of the
printer. Rotate the print jet clockwise until the dots align.
NOTE: As you rotate the print jet, ensure the
print jet cord is tucked under the top of the
printer cover.
14. Select the
checkmark
to continue.
15. Mount a material cartridge on the left side of the printer
and select the
checkmark
to continue.