3D Systems ProJet 6000 User Manual - page 20
Manual is about: 3D Professional Printer
of
72
3D Systems, Inc.
Detail A
Item
Function
Omron Sensor Display
Displays the measurements obtained by the omron sensor .
Omron Sensor
Detects the level of the material in the print tray. Used for fine adjustment only.
Cosense Sensor
Detects the level of material in the print tray . Used for coarse leveling only .
Beam Rest
Beam is projected onto the beam rest during the print leveling cycle .
Beam Profiler
A UV-sensitive detector used for beam calibration and adjustment .
20