3D Systems ProJet 6000 User Manual - page 40
Manual is about: 3D Professional Printer
of
72
3D Systems, Inc.
When
Profiling
is selected, the panel displays the functions outlined in red .
Control/Indicator
Function
X Width
Shows the beam width, in mils, in the X direction .
Y Width
Shows the beam width, in mils, in the Y direction .
Max ADC
Shows the maximum intensity of the beam .
Peak Sum
Indicates how well the beam is focused; the higher the value, the better the focus.
Profile at pinhole
Perform a profile of the Printhead’s drawing spot at the specified pinhole.
Find Pinholes
Call this action once the Printhead’s drawing spot is on the profiler to have the Printer find all the profiler
pinholes .
40