3Disc FireCR+ Service Manual - page 21
Manual is about: Computed Radiography Scanner
of
40
Service Manual
Fire
CR
+
Computed Radiography Scanner
Fire
CR
+
| Parts Removal/Replacement
21
Cassette Lock Motor Board
1. Remove Top Cover. (Pg. 14)
2. Remove Internal Cover. (Pg. 16)
3. The Cassette Lock Motor Board is located front section of the Fire CR+.
4. Remove the three wire harnesses that connect to the board.
5.
Remove four screws holding the board down and lift up.
Note: use a No. 2 screwdriver bit.
6. Reinstall in reverse order.
7. Reconnect the motor harnesses to their marked locations on the board (L=Left and R=Right).