3Disc FireCR+ Service Manual - page 24
Manual is about: Computed Radiography Scanner
of
40
Service Manual
Fire
CR
+
Computed Radiography Scanner
24
Parts Removal/Replacement |
Fire
CR
+
6. Remove 2 screws from aligner motor (2.5mm hex).
7. Cut cable ties holding wiring harness to cross bar.
8. Remove 3 BLDC bracket screws (2.5mm hex).
Note: Wiring harness routes under BLDC bracket
and along the side of scanner.
9. Remove 2 cable clamps along the side of scanner (#2 Phillips).