3Disc FireCR+ Service Manual - page 29
Manual is about: Computed Radiography Scanner
of
40
Service Manual
Fire
CR
+
Computed Radiography Scanner
Fire
CR
+
| Parts Removal/Replacement
29
9. Remove the screw on each side of the fiber bundle (2.5mm hex).
10. Lift out fiber bundle.
Note: Be careful not to scratch the fibers while pulling out the fiber
bundle and note the location of the dowel pin on each side.
11. Reattach in reverse order.
Note: When reattaching the fiber bundle, make sure that the fiber
bundle rests on the dowel pins before refitting the screws.