3M Multi-Touch C2167PW User Manual - page 13
3M™ Multi-Touch Display User Guide
13
3M Touch Systems, Inc. Proprietary Information –
TSD-44310 REV B
Display Mode
Refresh Rate (Hz)
640 x 480
60, 66, 72, 75
720 x 400
70
800 x 600
56, 60, 72, 75
832 x 624
75
1024 x 768
60, 70, 75
1152 x 864
75
1280 x 960
60
1280 x 1024
60, 75
1440 x 900
60, 75
1680 x 1050
60
1920 x 1080
60
Configuring the Display Settings
After you connect your Multi-Touch Chassis Display and turn on your computer, you
may need to configure one or more of these display settings. The ideal setting for the
Multi-Touch Chassis Display is as follows:
•
Display mode (also called desktop area or video native resolution)
less than or equal to
1920 x 1080 resolution
•
Refresh rate (also called vertical scan rate or vertical sync) 60 Hz
•
Color depth (also called color palette or number of colors) at least 16-bit (high color)
Adjusting the Multi-Touch Chassis Video Display
This section provides guidelines for adjusting the video display and using the display
controls to adjust the image to your liking. The controls for adjusting the video display
are located on the back of the Multi-Touch Chassis Display. These buttons let you
display the on-screen menu and adjust the phase, image position, contrast, and brightness.
Before you make any adjustments:
•
Be sure to adjust the controls in your normal lighting conditions.
•
Display a test image or pattern whenever you adjust the video.
User Controls For On Screen Display
Your Multi-Touch Chassis Display has five controls for adjusting the video display.
MENU UP DOWN SELECT POWER
Key/OSD
Menu Off Status
Menu On Status
Menu
Menu appear
Menu disappear/return to main item
Up
Brightness
Main item select up/Adjust up
Down
Contrast
Main item select down/Adjust down
Select
Enter/Select sub-item function
Power
Power On/Off