3M Wireless Tire Pressure Monitoring System Operation Manual - page 7
Mode II
Front tires and rear tires switch crisscrossly (No. 1*No. 3*No. 2*No. 4*No. 3*No. 1*No. 4*No. 2)
Display processes:
the " 2 " displayed at the lower right corner means the system is now in Mode II
Process 1: " 1 " is displayed at Tire No. 1; " 4 " is displayed at Tire No. 4; both are displayed in green
Process 2: " 4 " is displayed at Tire No. 2; " 1 " is displayed at Tire No. 3; both are displayed in red
Process 3: " 2 " is displayed at Tire No. 2; " 3 " is displayed at Tire No. 3; both are displayed in green
Process 4: " 3 " is displayed at Tire No. 1; " 2 " is displayed at Tire No. 4; both are displayed in red
After you have done with the Tire Switching Mode, press the Setup button to complete the Mode II setup
procedure and go back to normal display mode.
Process 1** Process 2** Process 3** Process 4
Process 1** Process 2** Process 3** Process 4
Mode III
Front tires move to rear crisscrossly; rear tires move to front parallelly (No. 1*No. 3*No. 2*No. 1*No. 3*No. 4*No. 4*No. 2)
Display processes:
the " 3 " displayed at the lower right corner means the system is now in Mode III
Process 1: " 1 " is displayed at Tire No. 1; " 4 " is displayed at Tire No. 4; both are displayed in green
Process 2: " 4 " is displayed at Tire No. 2; " 1 " is displayed at Tire No. 3; both are displayed in red
Process 3: " 2 " is displayed at Tire No. 2; " 3 " is displayed at Tire No. 3; both are displayed in green
Process 4: " 2 " is displayed at Tire No. 1; " 3 " is displayed at Tire No. 4; both are displayed in red
After you have done with the Tire Switching Mode, press the Setup button to complete the Mode III setup procedure and
go back to normal display mode.
Mode IV-1
Arbitrary tire location rearrangement:
the " 4 " displayed at the lower right corner means the system is now in Mode IV
A green light indicator is displayed at Tire No. 1, and the " 1 " displayed aside indicates you're setting up the location
for sensor No.1. Next, please deflate tire No. 1 to a pressure value lower than 26 psi. The pressure value is now displayed
at Tire No. 1, along with a red light indicator. Then, please inflate tire No.1 to a normal pressure value (no less than
26 psi and no greater than the recommended normal pressure value). The normal pressure value is now displayed at
Tire No. 1, along with a green light indicator. The " 4 " displayed at the lower right corner means the system is now in
Mode IV. If sensor No.1 remains at the same position and needs no reconfiguration, please press the Setup button
during Process 1 of Mode IV-1 to skip configuration of sensor No.1 and enter Mode IV-2 (as illustrated in Process 1 of
Mode IV-2). The screen will pause for 2 seconds and then automatically enter Mode IV-2
Process 1** Process 2** Process 3** Process 4
Process 1** Process 2** Process 3** Process 4
Mode IV-2
Arbitrary tire location rearrangement:
the " 4 " displayed at the lower right corner means the system is now in Mode IV
A green light indicator is displayed at Tire No. 2, and the " 2 " displayed aside indicates you're setting up the location
for sensor No.2. Next, please deflate tire No. 2 to a pressure value lower than 26 psi. The pressure value is now displayed
at Tire No. 2, along with a red light indicator. Then, please inflate tire No. 2 to a normal pressure value (no less than
26 psi and no greater than the recommended normal pressure value). The normal pressure value is now displayed at
Tire No. 2, along with a green light indicator. The " 4 " displayed at the lower right corner means the system is now in
Mode IV. If sensor No. 2 remains at the same position and needs no reconfiguration, please press the Setup button
during Process 1 of Mode IV-2 to skip configuration of sensor No. 2 and enter Mode IV-3 (as illustrated in Process 1
of Mode IV-3). The screen will pause for 2 seconds and then automatically enter Mode IV-3