3onedata IES7110-2GS-P User manual

Summary of IES7110-2GS-P

  • Page 1

    Ies7110-2gs series managed industrial ethernet switch user manual shenzhen 3onedata technology co., ltd tel: +86-755-26702668 fax: +86-755-26703485 www.3onedata.Com 【 summarize】 ies7110-2gs series is an industrial grade, managed and redundancy ethernet switch. It included ies7110-2gs-p (12/48vdc), i...

  • Page 2

    Ies7110-2gs-p (12/48vdc) 1. Ground screw 2. Pwr1/pwr2 power input 3. Relay output terminal block 4. Dip switch 5. Console port 6. Din-rail mounts 7. Wall mount screw hole 8. Relay alarm led 9. The power led 10. Systems running led 11. 100m link/act led 12. 1000m link/act led 13. 1000base-fx sfp port...

  • Page 3

    Important notice: 1. Power on operation: first of all, insert power cable’s terminal block into device’s power port, then insert power supply plug into power source 2. Power off operation: first off all, unpin power plug, then strike the terminal block, please take care of operation sequence. 【 dip ...

  • Page 4

    Port is transmit side, must connect to rx (receive side). The fiber interface support loss line indicator. Suppose: if you make your own cable, we suggest labeling the two sides of the same line with the same letter (a-to-a and b-to-b, shown as below, or a1-to-a2 and b1-to-b2). 【 led indicator】 ies7...

  • Page 5

    【 specification】 technology standard: support ieee802.3, ieee802.3u, ieee 802.3x, ieee802.3z, ieee802.1q, ieee802.1p, ieee802.1d, ieee802.1w protocol: arp, icmp, tcp, dhcp, dns, http, telnet,, sw-ring, rstp, snmp flow control: ieee802.3x flow control, back press flow control function switch function...

  • Page 6: Contact Details

    Contact details 2015 version 2.0 the netherlands germany north nordic region belgium germany south uk & ireland austria elektrostraat 17 nl-7483 pg haaksbergen t: +31 (0)53 573 33 33 f: +31 (0)53 573 33 30 e: nl@texim-europe.Com bahnhofstrasse 92 d-25451 quickborn t: +49 (0)4106 627 07-0 f: +49 (0)4...