4xem WPTZ User Manual - page 12

- 8 - 

The IP addresses shown in the "Current IP Address" field reflect those on the local 

network.    They may be from the DHCP server.    If there is no DHCP server, the camera 

will try to find a free IP address (this takes from 15 second to 3 minutes, depending on 

the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 

192.168.0.254. If any of the address inside this range is free, the Network Camera will 

be assigned to this IP address, and its subnet mask would be 255.255.255.0. If none 

of the addresses is free, the Network Camera will try the range from 192.168.0.2 to 

192.168.0.98.    After an IP address is assigned to the camera, the “Activity” status LED 

blinks. 

The new UPnP function will always assign an IP address for the Network Camera.    The 

Administrator can click on button “Link to selected device” to    connect the I.E. to the 

camera. 

If the camera is not on the IP installer list, click on the “Search” button to search for the 

camera on the LAN.