4xem WPTZ User Manual - page 30

- 26 - 

Build a Security Application 

The Administrator can combine 

options on the application page 

to perform many useful security 

applications. There are two 

trigger sources coming from 

attached devices, such as for 

motion detection. There are also 

two kinds of actions responding 

to such events, including 

uploading snapshots over the 

Internet and driving other 

attached devices. To upload the 

snapshots, the User can choose either email or FTP according to user’s needs. Both 

e-mail and FTP use the network settings on the Mail & FTP page. Refer to the definition 

section for detail configuration. 

1. Click on “Configuration” on the 

homepage, 

2. Click on “Application” in the left column, 

3. Check the weekdays as you need and 

give the period of "Snapshots begin" time 

and "Snapshots end" time to monitor the 

triggering conditions every day, 

4. Check the “Event operation”. The 

triggering condition can be set to detected 

motion or status of the attached device, 

5. Set the delay before detecting next 

event to avoid continuous false alarms 

following the original event,