A&D Profibus Interface AD-4402 OP-22 Instruction Manual - page 15
AD-4402 OP-22
Page 13
5.3.3.
5.3.3.
5.3.3.
5.3.3.Read Command List
Read Command List
Read Command List
Read Command List
Command Name
Command No.
Note
Material name 1 (1st to 4th character)
1
Material name 2 (5th to 8th character)
2
Material name 3 (9th to 12th character)
3
Material hopper
5
Final
6
Free fall
7
Preliminary
8
Optional preliminary
9
Over
10
Under
11
Zero band
12
Full
13
Tare
14
Supplementary flow open timer
15
Supplementary flow close timer
16
AFFC range
17
Initial dribble supply
18
Initial medium supply
19
Total weight
20
Total count
21
This data is stored in each
material code.
Specify a material code No.
before the input.
Specify a material code No.
at "Material code to store
(33)" of "Write command".
During setting, material
code No. can check by
"Material code to
store(33)" of "Read
command".
AFFC:Automatic free fall
compensation
Current material code
32
Material code to store
33
Weighing result
36
Last result is read.
Recipe name 1 (1st to 4th character)
40
Recipe name 2 (5th to 8th character)
41
Recipe name 3 (9th to 12th character)
42
Material 1
44
Material 2
45
Material 3
46
Material 4
47
Material 5
48
Material 6
49
Material 7
50
Material 8
51
Material 9
52
Material 10
53
Total weight
54
Total count
55
This data is stored in each
recipe codes.
Specify a recipe code No.
before the input.
Specify a recipe code No. at
"Recipe code to store
(57)" of "Write command".
During setting, recipe code
can check by "Recipe code
to store" of "Read
command".
Current recipe code
56
Recipe code to store
57
Error information
60
Refer to 5.4.Error information
Decimal point
61
Current tare
64
Tare = Gross - Net
OUT DATA,
5th word