A&D Profibus Interface AD-4402 OP-22 Instruction Manual - page 6
Page 4
AD-4402 OP-22
3.
3.
3.
3.Panel and Names
Panel and Names
Panel and Names
Panel and Names
3.1.1.
3.1.1.
3.1.1.
3.1.1.
STATION NO. and Baud
STATION NO. and Baud
STATION NO. and Baud
STATION NO. and Baud Rate
Rate
Rate
Rate
Station Address
Set a station address (station No.) of this slave device
using two switches.
Switches
x1, x16 (16
0
, 16
1
)
Range
0 to 125.
Example: For address 44, Turn the dial to 2 (x16), C (x1).
Baud Rate
Baud rate is automatically detected. It is not necessary to set the rate.
9.6
kbps
19.2
kbps
93.75
kbps
187.5
kbps
500
kbps
1.5
Mbps
3
Mbps
6
Mbps
12
Mbps
3.1.2.
3.1.2.
3.1.2.
3.1.2.
Status LED
Status LED
Status LED
Status LED
These LEDs indicate the status of the interface.
OP-St (AD-4402 and option status)
Net-St (Network status)
Green ON
Device operational
On-line (Normal )
Flashing Green
-
Off-line
Red ON
Unrecoverable fault
-
Flashing Red
Recoverable fault
Communication error
Station Address Switch (station No. )
x16
Hexadecimal number, upper figures
x1
Hexadecimal number, lower figures
STATUS LED
OP-St
AD-4402 and option status
Net-St
Network status
Connector
D-sub 9pin