A&D Profibus Interface AD-4402 OP-22 Instruction Manual - page 21
AD-4402 OP-22
Page 19
7.
7.
7.
7.Monitor Mode
Monitor Mode
Monitor Mode
Monitor Mode
7.1.
7.1.
7.1.
7.1.Operation and Indication
Operation and Indication
Operation and Indication
Operation and Indication
This mode is used to monitor the condition of the indicator.
The OUT DATA, IN DATA and STATUS can be monitored during operation. The
mode does not need to stop a current communication and weighing sequence.
Data is only displayed, can not be rewritten.
The monitor format is hexadecimal numbers.
Use the following keys to operate the monitor mode.
Entering the monitor mode......... When weighing value is displayed, press and hold the
ENTER key and press the key. Enter check menu
with the key and the ENTER key.
Menu: [
Check] - [Monitor] - [Option] - [OP-22]
Selecting a data ..................... The 1 key (Order of OUT
® IN1 ® IN2 ® STATUS)
The 2 key (Order of OUT
® STATUS ® IN2 ® IN1)
End key (Exit key).................. ESC key
123
kg
STATUS ADRS 44 BAUD 12M
STATUS
Example: Address 44
Example: Baud rate
12 Mbps
123
kg
OUT
LSB
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
LSB side
MSB side
OUT DATA
123
kg
IN-1
LSB
48 00 00 00 00 00 01 23
LSB+9
00 00 20 00 00 00 00 00
LSB side
IN DATA
IN-1
Lower bytes + 9 bytes
123
kg
IN-2
LSB+10
48 00 00 00 00 00 08 88
MSB
00 00 80 00 00 00 00 00
Lower bytes + 10 bytes
IN DATA
IN-2
MSB side