A&D UC-321P Instruction Manual - Caution

How to Connect the Cable

Caution

Be sure to turn off your personal computer before connecting the

cable.

The  DATA  PORT is located on the

bottom of the UC-321P unit as

shown at the right.

1

Set the slide switch to “WEIGHT”.

2

Insert the mini jack of the cable into

the UC-321P DATA PORT.

3

Connect the other end of the cable

(9 pin) to the RS-232C port of your

computer.

4

Start your computer.

Notes

Keep the cable straight and keep

the feet of the UC-321P off the

cable.

Gathering the excess length of

cable and putting it under the

scale is not recommended. This

can cause the UC-321P to give an

inaccurate reading.

Starting  Weight Diary  Software

Run the Weight Diary from START/ PROGRAM/ Weight Diary/ Weight

Diary.

You will find the instruction manual  and the Weight Diary Help Menu in the

CD-ROM.

-  13  -