A&D UC-321P Instruction Manual - Memory Function

Memory Function

Up to 31 weight data can be stored in memory. The 32nd data is stored by

deleting the oldest stored data. The difference from the previous result is

displayed automatically.

Storing a Current Weight.

1

Set the slide switch to “MEMORY”.

2

Press the measurement switch gently.

The last weight is displayed.

3

Step on your scale.

When  0.00 kg and the   mark are

displayed, step on your scale gently. The

measurement is started when the   mark

disappears. Remain still during the

measurement.

If 0.00 kg is displayed for approximately

ten seconds, the scale is automatically

turned off.

4

The weight can be read after the 

mark is displayed.

5

Step off the scale.

6

The weight is stored in memory

and the difference from the last

weight is displayed.

The weight data is stored in memory

and the difference from the previous

result is displayed for approximately

five seconds. And the scale is auto-

matically turned off.

-  6  -