A&D UC-321P Instruction Manual - Target Function
Other manuals for UC-321P:
Datasheet
Manual is about: Precision Health Scale
of
16
Target Function
The difference between the preset target weight and the current weight can
be displayed.
Presetting a New Target Weight
1
Set the slide switch to “TARGET”.
2
With the scale turned off, press and hold
the measurement switch gently.
The preset target weight is displayed.
3
Using the measurement switch, set a
new target weight.
Press and release the measurement switch to
increase the value in increments of 0.1.
Press and hold the measurement switch to
increase the value continuously.
4
When the desired value is displayed,
release the measurement switch to
store it.
The scale is automatically turned off after the
new target weight is displayed for approximately
five seconds.
Slide switch
Measurement switch
- 8 -