A&D UC-321P Instruction Manual - Specifications
Specifications
Digital display
Liquid crystal display, 25 mm character height
Maximum capacity
150 kg
Minimum display
0.05 kg
Power source
Four type AA batteries (R6P, 1.5 volt x 4)
Battery life
Approximately 2000 measurements
Accessories
Instruction manual, Add-on feet (4), Batteries (4),
Connecting cable,
CD-ROM “Weight Diary” Windows
TM
software
Specifications are subject to change without prior notice and any obligation
on the part of the manufacturer.
Maintaining the Scale
Clean the scale with a dry, soft cloth or a cloth moistened with water and a
mild detergent. Never use alcohol, benzene, thinner or other harsh chemicals
to clean the scale.
Remove the batteries, if the scale is not going to be used for a long time.
Before Requesting Service
If this happens
Please do this
- 15 -
Nothing is displayed by pressing the
measurement switch.
The indication is fixed to
.
or is displayed.
The difference between an estimated
weight and a measured weight is bigger.
is displayed.
Check the battery installation.
Replace with four new batteries.
Remove and reinstall the batteries.
Move your scale to a flat, solid surface.
Does the scale bottom touch the floor?
Replace the batteries and try again.
If you can not locate and fix the problem, contact your supplier, or the A&D
service group. The A&D service group will support authorized suppliers about
technical information, spare parts and units.