A-Neu Video ANI-PS112 Instruction Manual - page 14
12
OPERATION
Multiple Pattern Selection
Reset the operation panel to initial mode:
q
→
Press the WIPE button
d
to place the unit in WIPE mode.
w
→
Select a wipe pattern e.g. straight wipe by pressing button
y
.
e
→
Press the MULTI button
t
repeatedly to have the desired multiplication effect.
(4) options are available: x1, x2, x4 and x8.
r
→
Press one of the A-bus selection buttons to select a source.
t
→
Press one of the B-bus selection buttons to select a source.
y
→
Operate the video slide
5@
to control the wipe pattern.
*The same procedure applies to the other wipe patterns.
ONE-WAY WIPE
q
→
Press the WIPE button
d
to place the unit in WIPE mode.
w
→
Select a wipe pattern e.g. straight wipe by pressing button
y
.
e
→
Press the ONE-WAY
3
button.
r
→
Press one of the A-bus selection buttons to select a source.
t
→
Press one of the B-bus selection buttons to select a source.
y
→
Operate the video slide
5@
to control the wipe pattern.
REVERSE WIPE
q
→
Press the WIPE button
d
to place the unit in WIPE mode.
w
→
Select a wipe pattern e.g. straight wipe by pressing button
y
.
e
→
Press the REVERSE
r
button.
r
→
Press one of the A-bus selection buttons to select a source.
t
→
Press one of the B-bus selection buttons to select a source.
y
→
Operate the video slide
5@
to control the wipe pattern.
A
NEU
VIDEO
* The wipe pattern moves in the normal direction the Video
Slider control
5@
is operated.
* The wipe pattern moves in the normal
direction the Video Slider control
5@
is
operated.