A-Neu Video ANI-PS112 Instruction Manual - page 9
7
OPERATION CONTROLS & FUNCTIONS
Digital Effects
l
A-bus digital effect ON button.
;
A-bus Still button and OSD left adjust.
2)
A-bus Paint button and OSD right adjust.
2!
A-bus Negative button and OSD up adjust.
2@
A-bus Mosaic button and OSD down adjust.
2#
B-bus digital effect ON button.
2$
B-bus Still button.
2%
B-bus Paint button.
2^
B-bus Negative button.
2&
B-bus Mosaic button.
ADJUST
2*
Adjust Button:
When LED switched off,
the SDP review output side will show AB-bus
/ output source and output format. When LED
illuminate, the user can press
;
/
2)
/
2!
and
2@
buttons to adjust the values.
2(
DEMO Button:
When LED illuminate, the
auto DEMO will switch to ON and the system
will auto sequence Demo 96 wipe patterns,
press the
q
TIME button to adjust the auto
sequence.
3)
SCAN Button:
Press and hold SCAN button
for 3 seconds, the system will enter into SCAN
function and will SCAN the input ports from 1 to
6 and record each port’s format to the system.
VIDEO/AUDIO MIXER
3!
AUDIO FOLLOW:
When turn on the Audio
Follow A/B bus’s sound indicator will follow the
VIDEO slider movement. When turn off the
Audio Follow, the audio indicator will become
independent to adjust from
5!
and
5@
.
3@
AUTO/WIPE:
AUTO FADE/WIPE can be
performed with START
5)
button when the
button
4(
is set to ON.
3#
START Button:
Automatic MIx and WIPE
operation can be performed by pressing the
START button. Transition time can be adjusted
via TIME
q
. When transition time lapsed, the
LED goes off.
4&
VIDEO Slide:
Wipe, PIP and Key effects can
be controlled by this Video slide which moves
A/B bus outputs horizontally or vertically.
A
NEU
VIDEO