A-Neuvideo ANI-88HDRH Instruction manual - page 16
14
WebGUI Control
Video Switch
This page provides video routing settings, preset saving/
loading, and Pattern timing/color control settings.
• Video Routing: To begin assigning a new video route, please click
the button of the HDMI output you wish to send video to and then
click on the button of the preferred HDMI input port. If desired, you
may select more than one output prior to selecting the input. As you
select each button they will change their color to orange. The new
route will become active immediately after selecting the input port
and the routing information displayed on the buttons will change
accordingly.
• Output and Input Naming: All inputs and outputs can be renamed
as required. To rename the input and output ports please click the
“edit” icon ( ). Click the “Save” button to confirm the change.
NOTE: Blank spaces are not allowed in names.
• Output Video Mute: Each output can be individually muted (black
video, no audio). To mute an output, please turn on the icon.
• Pattern Timing: This Pattern timing tab provides multiple timing for
HDMI output, The supports timing are list below: 4K2K25~4K2K60
and 1080p60/1080p50 and 720p60/720p50.
• Pattern Color Control: The section allows for set the pattern color.
• DownScaling: The section allows for adjust from 4K2K to 1080
resolutions.
• OSD Text: The section allows the user to enable and disable the
OSD Text functions. If enabled, the OSD Text function allows text
entered in
“OSD Text” to be displayed in the upper right corner of
the window. The text length is limited to 64 characters.
• OSD Text Settings: Each output can display (1) line of customized
OSD text. The text can be customized in content, background color,
size and position. Click the
“edit” icon ( ) associated with each
output to modify these settings. Please click the
“Save” button after
making changes to the positioning or content. All other changes
occur as soon as they are made.
A
NEU
VIDEO